myenergi Zappi EV Charger
- EV charging from surplus solar
- Dynamic Load Balancing for Max Installation Flexibility
- 3 Charging Modes
Rated Power
7 kW or 22kW
Phase
Single Phase or Three Phase
Charging Current
6A to 32A (variable)
Enclosure Dimensions
439mm x 262mm x 122mm
Charge your EV with your PV
The myenergi Zappi was the first-ever solar EV charger. With this smart EV charger, you can use 100% solar energy to power your car. This means you can maximise the ROI on your panels and save the planet at the same time.
Even if you don’t have solar panels yet, the Zappi can still charge your car using power from the grid. Use the myenergi app to control your car charging. Schedule charging for off-peak hours, boost charging speed when needed, and even monitor your devices from your phone.
Zappi Charging Modes
The Zappi EV charger offers three charging modes, letting you customise the way your vehicle charges to fit your needs.
Eco
This mode is a mixture of energy from your PV system and the grid. Eco mode prioritises using solar energy and adjusts the charging power in response to changes in generation or power being used elsewhere in the home. Additional power will be drawn from the grid to top it back up if the surplus generation drops below 1.4 kW.
Eco+
Similarly to Eco, Eco+ continuously adjusts the charge power in response to changes in your generation or power consumption. If your EV charging is using too much energy imported from the grid, it will pause until surplus power is available.
Fast
As the name suggests, this mode will prioritise your vehicle’s charging speed. It will primarily use energy from your PV, but if needed, it will draw power from the grid to ensure your car is charged as quickly as possible.
| Rated Power | 7 kW (1-ph) or 22 kW (3-ph) |
| Charging Current | 6A to 32A (variable) |
| Dynamic Load Balancing | Optional setting to limit current drawn from the unit supply or the grid |
| Connector Type | Type 2 tethered cable (6.5m) or Type 2 socket with locking system |
| Charging Profile | 3 charging modes (ECO, ECO+ & FAST) |
| Compliance | LVD 2014/35/EU, EMC 2014/30/EU, EN 61851-1:2017, EN 62196, EN 62955:2018 CE Certified |
| Related Supply Voltage | 230V AC single phase or 400V AC 3-phase (+/- 10%) |
| Supply Frequency | 50 Hz |
| Rated Current | 32A max |
| Standby Power | Consumption 3W |
| Earth Leakage | Protection Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955) |
| Economy Tariff Sense Input | 230V AC sending (4.0kV isolated) |
| Wireless Interface | 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options |
| Grid Current Sensor | 100A max. primary current, 16mm max. cable diameter |
| Supply Cable Entry | Rear, bottom or side |
| Enclosure Dimensions | 439mm x 282mm x 122mm |
| Protection Degree | IP65 (weatherproof) |
| Enclosure Material | ABS 6 & 3mm (UL 94 flame retardant) |
| Operating Temperature | -25˚C to 40˚C |
| Model No. | Power Rating | Connector | Colour |
|---|---|---|---|
| ZAPPI-207UW | 7 kW | Untethered | White |
| ZAPPI-207TW | 7 kW | Tethered | White |
| ZAPPI-207UB | 7 kW | Untethered | Black |
| ZAPPI-207TB | 7 kW | Tethered | Black |
| ZAPPI-222UW | 22 kW | Tethered | White |
| ZAPPI-222TW | 22 kW | Untethered | White |
| ZAPPI-222UB | 22 kW | Tethered | Black |
| ZAPPI-222TB | 22 kW | Untethered | Black |