Reconnect Your GoodWe Inverter to WiFi
Read the instructions below to reconnect your GoodWe inverter to WiFi so you can use the SEMS+ smart energy management and monitoring platform.
If you can’t find what you’re looking for, refer to the GoodWe WiFi configuration instructions, or please get in touch with our service department for assistance.
Steps for Reconnecting a GoodWe Device
Step 1: Open Local Access
Open the SEMS+ app and tap Services in the bottom navigation. Then, under Configuration, select Local Access.
Step 2: Find and Select the Device
Choose Bluetooth or Wi-Fi. Select the connection supported by the device and phone. Tap Search Device and wait for nearby compatible devices to appear. Refer to the signal name or serial number to select the matching device. This will open the local login.
Step 3: Complete Local Authentication (If Prompted)
Local Access may request a device password after you select the target device. Check the signal name or serial number before authenticating. If prompted for a password, enter 1234, then create a new local password. Use your new password for future access.
Step 4: Open WLAN/LAN Settings
Tap Dongle and open the communication module card from the device overview. Open the Settings tab, then click WLAN/LAN. This is the existing device network screen.
Step 5: Connect the device to WLAN
Select the router and turn on WLAN. Choose the network and enter its password. The selected network must show Connected.